EXALT TRX CLEATS

Features 7 Spike locations in the forefoot of the out sole 3 Spike locations at the heel of the out sole Flexible out sole design allows better traction when crawling Included: 22 Turf spikes 22 Mud & dirt spikes Spike tool Cleat Bag

BOB LONG CLOSER EXP

Meet the Closer EXP

The lightest Marq to date has been re-equipped and re-priced for 2009! Our Closer EXP’s new price tag will help you own now and upgrade over time. Downgrade? Not exactly. EXP’s come laced up with Proficiency Valving which is the future of Marq Performance. Imagine that long accurate shot which made the Marq famous, coupled with a 1700+ shot count from a 68ci 4500psi air source. Other factory goodies include our Exclusive Tadao Ryujin board and the classic dual bearing trigger. Dream of the best upgrades because the Closer is quite expandable. Step it up with 4C® System Enhancing Eyes capable of ramping upwards of 28 BPS. Gear Drive? Cam Drive? Which ASA / Drop combo works for you? Top off your Closer EXP with a Leverlock Feedneck and a Two Piece Barrel System for the ultimate in tournament level preparedness.

How it Works

The Closer EXP firing sequence begins when the trigger is pulled activating the micro switch. If the break-beam infrared eye system senses that a paintball is properly staged in the breech, the motherboard energizes the solenoid coil opening its valve. This volume of air travels through a passage where it terminates against the back face of the ram. The ram is accelerated forward by said volume of air pushing the bolt which pushes the staged paintball into firing position. Once the staged paintball is in firing position the ram continues forward even further engaging the poppet shaft. The poppet valve is forced open. A blast of air rushes from the primary air chamber through the poppet valve. This air blast is then redirected down the blast guide through the bolt toward the paintball accelerating the ball to 300 FPS in less than 6 inches of barrel length. During this process the solenoid coil has already been de-energized redirecting a volume of air through another passage where it terminates against the front face of the ram. Finally this volume of air accelerates the ram backward allowing the poppet valve to close while withdrawing the bolt. Now the on-deck paintball will fall into the staged position and the firing sequence may begin again.

What’s New and Innovative?

The Marq Series was engineered for speed. Ease of maintenance and repair were also at the for-front of this markers revolutionary conception. The inline regulator receptacle has been combined with the mainbody and the grip frame sports a thin, light weight design the width of a common 9 volt battery. Marq solenoids are manifold mounted in a configuration which further simplifies mechanics while enhancing flow characteristics. Another industry first from Bob Long is the Marq’s autonomous LPR which also mounts securely to the underside of the Marq’s mainbody. Other markers utilize built in LPR’s needing access caps which often look more like an afterthought. Our modular inboard style LPR allows the Marq to have an uninterrupted shape for a more ergonomic look and feel. The heart and soul of our creation is the firing engine assembly. Bolt, air chamber, poppet valve and ram have all been combined resulting in a fast, inline propulsion mechanism with more efficiency potential than its spool valve rivals. Made famous by the Marq Series, the included quick disconnect pillow bolt more softly contacts the paintball in the early stages of the firing sequence. A pair of spring driven linear travel ball detents are positioned perfectly in the breech to control over feeding. All Marq’s are 4C eye compatible. A simple 5 minute install is all that’s required to realize it’s now time for a faster hopper.

SPECIFICATIONS

Classification:	Generation 1 Marq Series
Configuration:	Electro-pneumatic. Open bolt. Inline poppet valve.
Barrel Thread Type:	Autococker
Included Barrel:	14” One Piece Tournament Series
Included ASA:	Xpress Mount Standard
Intended Propellant:	Compressed air or nitrogen only!
Intended Propulsion Speed:	230-300fps
Inline Regulator Pressure:	200-220psi
LPR Pressure:	75-80psi
Estimated Shot Count:	1700+ shots (factory settings using 68ci 4500psi air source)
Motherboard:	Tadao Ryujin
4C Eye Compatible:	Yes
4C Eye Equipped:	No
Estimated Rate of Fire:	28+BPS (4C eye upgrade with board set in ramping mode)
Trigger Activation:	Micro switch
Trigger Return:	Spring assist
Trigger Adjustment:	Pre-travel. Post-travel
Weight Without Barrel:	1 lbs. 15.1oz.

VALKEN G6R MAKER(BOB LONG)

Description The G6R is by far the most advanced Intimidator yet. Included with your G6R is the tried and true 360 Inline Regulator featuring our all new Lower Pressure Spring Pack. You can recognize the Lower Pressure Spring Pack by the BLUE color of its Spring Follower. Be sure you don’t swap out the included Lower Pressure Spring Pack with another Standard Spring Pack or your G6R will no longer function as designed. If you didn’t already purchase a Gen 6 Intimidator HPR/LPR Pressure Tester, you should do so as soon as possible. We want our Bob Long owner community to be pressure conscious and able to maintain their markers properly. One of the main keys to a good shooting marker is properly setting the operating pressures. Learning about basic maintenance and baseline pressure settings is a must for a happy marker.

Features Classification: Generation 6 Intimidator Configuration: Electro-pneumatic. Open bolt. Stack tube poppet valve. Barrel Thread Type: Autococker Included Barrel: Bob Long 14” One-piece Tournament .685 Bore Included ASA: Gen 6 Intimidator On-off Intended Propellant: Compressed air or nitrogen only! Intended Propulsion Speed: 230-300FPS (feet per second) HPR Pressure: 190-210psi LPR Pressure: 70-80psi Estimated Shot Count: 2100+ shots (factory settings using 68ci 4500psi air source) Motherboard: Tadao Odoshi 4C Eye Compatible: Yes 4C Eye Equipped: No Estimated Rate of Fire: 26+BPS (4C eye upgrade with board set in ramping mode) Trigger Activation: Micro switch Trigger Return: Spring assist Trigger Adjustment: Travel and Activation Point Weight With Barrel: 1 lb. 13.7 Weight Without Barrel: 1 lb. 8.9oz

Planet Eclipse EGO11 Paintball Marker Trailer

ECLIPSE EGO 11 PAINTBALL MARKER

EGO 11 SPECIFICATIONS

DIMENSIONS

WEIGHT	882g/1.94lb (including 14" Shaft4 Barrel,Battery,Feed,POPS)
LENGTH	542mm (including 14 " Shaft4 Barrel)
HEIGHT	211mm
WIDTH	27mm

MATERIALS

BODY	6061-T6 Aluminium
BARREL	6061-T6 Aluminium
FRAME	6061-T6 Aluminium
FEED	6061-T6 Aluminium
EYE COVERS	6061-T6 Aluminium

ELECTRONICS

INTERFACE	3 Push buttons on frame with tourney lock on PCB
DISPLAY	Transflective LCD w/ Tru-Color adjustable backlite
SOLENOID VOLTAGE	5v
PROCESSOR VOLTAGE	3v
PROCESSOR	16-Bit 16 MIPS
POWER SUPPLY	1 x 9v (PP3) Battery
EPORTAL	Compatible (sold separately)

HARDWARE

ASA MOUNT	T-slot mounted adjustable rail with POPS (Push On Purge System)
TRIGGER METHODS	Micro-switch and Break Beam Opto-switch
TRIGGER MECHANISM	Leaf spring and magnetic return
TRIGGER PIVOT	Dual instrument ball race units mounted in bearing carrier
BARREL	2-Piece Micro Honed Shaft4 14" length 0.689" Bore
FEED TUBE	Lever operated Clamping Feed with Sprocket thumb wheel

PNEUMATICS

OPERATING PRINCIPLE	Under and Over Poppet
SOLENOID TYPE	Custom MACNoidTM Solenoid valve
DRIVE MECHANISM	Zick2 Rammer System
BOLT MECHANISM	Cure3 Bolt

ERGONOMICS

GRIP TYPE	Contoured dual density grip
GRIP PITCH	162mm

FIRMWARE

FIRING MODES	Semi & Ramping capped and uncapped
DEBOUNCE MODES	10 Debounce Modes

EGO 11 - THE EGO PHILOSOPHY

Monitoring trends in paintball and responding to them in a way that benefits the player is very difficult, and providing a product that is all things to all men is well-nigh impossible, however Planet Eclipse takes pride in being able to react quickly THE MORE GENTLE THE ACCELERATION AND DECELERATION OF THE SYSTEM, THE SMOOTHER THE MARKER FEELS...to changing trends; to give customers what they want; and to give them the flexibility to have their marker set up just the way they like it. This philosophy has never been more evident than in the new Ego11.

For the past 18 months the main design goal at Planet Eclipse has been to develop markers with an improved ‘feel’; smooth-shooting markers with a reduced sound signature that can handle super-brittle, tournament-grade paint. Controlling the speed of the bolt in any marker is the key to improving the feel - the smoother the acceleration and deceleration of the bolt system, the smoother the marker feels – but of course reducing the bolt speed also reduces the marker’s maximum achievable rate of fire and so, as with many things in life, there is a trade-off between improved feel and outright speed. But what if you want your Ego11 to shoot as fast as previous Egos? If the marker is tuned for smoothness, how do you get the speed? What if you want to shoot 15bps but want it smooth? What if you only care about shooting 12bps - because that’s all you can use with current tournament rules - but you want it to be as smooth as possible? THE EGO11 COMES EQUIPPED WITH AN INDUSTRY FIRST, A BESPOKE (PROPRIETARY) MACNOID^TM MANUFACTURED BY MAC VALVES USA - THAT INCORPORATES TWIN FLOW CONTROL DEVICES...How can you have all these things in one solitary marker? Up until now it simply wasn’t possible without making after-market changes to the marker - major, time-consuming, physical changes to the pneumatic system or re-machined parts that provided different dynamic characteristics. This is no longer the case, not any more.

The Ego11 comes equipped with an industry first, A bespoke (proprietary) MACNoid^TMmanufactured by MAC Valves USA - that incorporates twin flow control devices. These Solenoid Flow Controls each comprise a quarter-turn adjuster which has a pointer to indicate position on an incremental scale etched into the body of the solenoid. The Solenoid Flow Controls are used to independently control both the forward and rearward speed of the rammer and bolt so that, for the first time ever in a poppet marker, the user can tune the feel of the marker with a simple twist of a screwdriver. In the time it takes to turn off the tourney-lock, the Ego11 can be switched from a high speed, uncapped, free-for-all machine to the softest, gentlest, smoothest shooting poppet you have ever felt – or anything in-between. The analogue adjustment allows an infinite level of control over the speed of the rammer and bolt in either direction, providing unprecedented influence over the dynamic characteristics of the marker. With the Ego11 it looks like you really can have your cake and eat it!

Of course, the solenoid is not the only component to get a complete overhaul. Take a look around the grip frame and there are several things that should jump out, like the new POPS ASA for instance. POPS stands for Push-On-Purge-System and is a completely new concept in On/Off/Purging ASAs. The idea is simple, push back on the front ‘Bonnet’ POPS STANDS FOR PUSH ON PURGE SYSTEM AND IS A COMPLETELY NEW CONCEPT IN ON/OFF/PURGING ASAS...section of the POPS and this depresses the air system valve pin – gassing up the marker – before latching itself into place; the operation takes just a fraction of a second. Once gassed up the bonnet stays in position until the pushbutton on the side of the POPS bonnet is depressed, at which point the bonnetPOPSforward and the marker purges itself of air; again, de-gassing takes a fraction of a second and very little effort. The new POPS features, T-Slot mounting to the frame, but this time with a longer adjustment range than on previous Eclipse ASAs. The POPS also incorporates front porting for the first time on an Eclipse ASA, together with a new fitting that seals without the need for Loctite or PTFE tape and which can be quickly and easily removed with a hex key. Shortened Macroline transports air into a second fitting in the new, angled swivel on the exceptional SL3 regulator.

The SL3 regulator needs little introduction at this point, it was first seen on last season’s SLS and went on to appear on the Geo2. The SL3 retains all of the simplicity of previous Eclipse regulators while introducing many new features. Notably, regulator seals with improved durability are incorporated into a new seal system that allows the regulator seal to be flipped or replaced as required - piston replacement is no longer necessary with this new design. Improved regulation across a wide range of input pressures has also been achieved, providing superior performance with both HP (High Pressure) and LP (Low Pressure) Air Systems – alternating between the two will WITH A BRAND NEW MOLDED RUBBER CONSOLE THAT RUNS ALL THE WAY UP THE BACK OF THE FRAME TO ADD COMFORT AND GRIP...have no effect on marker velocity. The benefit of this added stability is evident when it comes to the game, where you can shoot the Ego11at full velocity right down to the last 200-300psi of tank pressure; you can really squeeze every last bit of performance out of your system.

Those who are observant may also notice the modified spacing between the SL3 regulator and the grip frame. The inclusion of the new solenoid has given the Ego11 the opportunity to spread its stance a little; the frame has been moved backwards allowing more room between the regulator and the trigger guard, just enough to add some additional support and control to the marker, but not enough to forsake the compact dimensions and sharp handling that Ego users have become accustomed to.

The Ego11 has received some interesting changes to the frame and grips. The new frame profile sees, yet again, a higher grip position, placing the rear hand still closer to the barrel axis and firing line. The all-new grip is slimmer in the middle section and actually sunk into the frame around most of its perimeter. These grips combine in turn, with a brand new molded rubber console that runs all the way up the back of the frame to add comfort and grip.  The combination of grip and console make the Ego11 by far the most comfortable and ergonomic Ego to date. Further simple mechanical changes ensure that the grip screws clamp down firmly into place without the chance of crushing the grips or, more importantly, any internal components.

Inside the protective cocoon of the frame lies the Eclipse circuit board. Designed to negate the need for an expensive after-market ‘upgrade’, this board has all of the features that the discerning player needs. The large screen LCD module provides excellent contrast in even the brightest sunlight, using significantly less power than its OLED counterparts; indoors, a tru-color backlight can be customised to taste; furthermore, in the event of damage, the LCD module can be quickly and easily replaced. Twin trigger sensing circuitry – micro-switch or optoelectronic sensor – can be selected and tuned to individual requirements using multi-parameter trigger de-bounce algorithms. Prioritized solenoid drive circuitry produces superb shot-to-shot consistency and rate of fire accuracy. THE TWO-PIECE BARREL HAS BEEN RE-DESIGNED FOR BETTER EFFICIENCY AND CONSISTENCY AND PORTED FOR A REDUCED SOUND SIGNATURE...An expansion port allows the Ego11 to be connected to a PC using the optional Eclipse E-Portal kit which provides firmware re-programming, splash screen design and control parameter editing functionality. A low power, 16-bit microprocessor provides the brawn, and stable firmware, refined over years of tournament play provides the intelligence. With all the adjustability and functionality you could ever need, the range of features on the Ego11 is simply breathtaking: a refill counter; ROF indicators; timers; audible indicators; RF transmitter compatible; you name it, the Ego11 board will do it or support it.

Also inside the frame is the main interface between player and marker, the trigger. This improved trigger – with new bearing carrier and new spring system – has 5 points of adjustment: forward travel; rearward travel; magnetic return strength; spring return strength; and micro-switch actuation point. Designed in the ever-popular S-style, the trigger has the smooth, slop-free action that has been the backbone of Eclipse markers for years. The wide range of adjustability and the option of magnetic or spring return make it quick and easy to set up for individual taste without the need to break the gun apart in order to get at adjusters; as with everything in an Eclipse marker, simplicity and reliability are key.

Internally the Ego11 boasts the Zick2 kit; the Cure3+ bolt; the same LPR found on the SLs; the same LP protection vent that was found in the Ego10; and the same infra-red Break Beam Sensor System used on all Eclipse markers to date; all highly-proven, tournament-winning components.

Up front, you’ll find the new Shaft4 barrel. Supplied in the same 14”, 0.689” bore configuration that has been receiving outstanding reviews since its launch on the Geo2 early in 2010, this two-piece barrel has been re-designed for better efficiency and consistency and ported for a reduced sound signature; there really is no need to replace this exceptional, stiff arbour honed, premium barrel. Also coming soon, optional extra boost kits giving the user the ability to change bore size and tip length.

Finally, the Ego11 comes packaged in a new zippered case along with a full hex key set; oil; barrel sock; a full-colour 84-page manual; and a comprehensive spares kit which includes regulator components, o-rings, detents, springs and screws.

The Ego11 has been developed and created with the sole intention of giving the modern player the things that they most desire in a modern paintball marker: a smoother shot; a quieter sound signature; outstanding efficiency; unparalleled reliability; simplicity; ergonomics; built-in user adjustability and choice; industry-leading customer service; and, with the addition of a simple kit, 50cal compatibility. All this from a company that - whatever the situation, whatever the occasion - will always have your back.

The Ego11, born of the player.

EGO 11 FEATURES

• Shaft 4 2-Piece Barrel
• New Push Operated Purge System (POPS)
• SL3 Inline Regulator
• Adjustable Low Pressure Regulator
• Zick 2 Rammer Assembly
• Cure 3+ Bolt
• Def-Tek Offset Feedneck
• C-Lever Clamping Feedneck
• Dual Selectable Trigger Switching - Opto and Micro Switches
• Dual Trigger Return Mechanisms - Spring and Magnetic Return
• Integrated Audible Beeper for Alarms and Actuations
• Capped and Uncapped Ramp Modes
• All Major Tournament Presets
• 9 Preset Debounce Modes
• 5-Point Adjustable Trigger
• T-Rail Mounting System
• BBSS (Break Beam Sensor System)
• Multicolored Transflective LCD Module
• Eclipse E-portal Compatible
• New contoured Rubber Grips and Push Button Console
• User Adjustable (Custom Manufactured) Solenoid Valve
• Break Beam Sensor System