EGO11 SPECIFICATIONS
DIMENSIONS
| WEIGHT | 882g/1.94lb (including 14" Shaft4 Barrel,Battery,Feed,POPS) |
|---|---|
| LENGTH | 542mm (including 14 " Shaft4 Barrel) |
| HEIGHT | 211mm |
| WIDTH | 27mm |
MATERIALS
| BODY | 6061-T6 Aluminium |
|---|---|
| BARREL | 6061-T6 Aluminium |
| FRAME | 6061-T6 Aluminium |
| FEED | 6061-T6 Aluminium |
| EYE COVERS | 6061-T6 Aluminium |
ELECTRONICS
| INTERFACE | 3 Push buttons on frame with tourney lock on PCB |
|---|---|
| DISPLAY | Transflective LCD w/ Tru-Color adjustable backlite |
| SOLENOID VOLTAGE | 5v |
| PROCESSOR VOLTAGE | 3v |
| PROCESSOR | 16-Bit 16 MIPS |
| POWER SUPPLY | 1 x 9v (PP3) Battery |
| EPORTAL | Compatible (sold separately) |
HARDWARE
| ASA MOUNT | T-slot mounted adjustable rail with POPS (Push On Purge System) |
|---|---|
| TRIGGER METHODS | Micro-switch and Break Beam Opto-switch |
| TRIGGER MECHANISM | Leaf spring and magnetic return |
| TRIGGER PIVOT | Dual instrument ball race units mounted in bearing carrier |
| BARREL | 2-Piece Micro Honed Shaft4 14" length 0.689" Bore |
| FEED TUBE | Lever operated Clamping Feed with Sprocket thumb wheel |
PNEUMATICS
| OPERATING PRINCIPLE | Under and Over Poppet |
|---|---|
| SOLENOID TYPE | Custom MAC Solenid valve |
| DRIVE MECHANISM | Zick2 Rammer System |
| BOLT MECHANISM | Cure3 Bolt |
ERGONOMICS
| GRIP TYPE | Contoured dual density grip |
|---|---|
| GRIP PITCH | 162mm |
FIRMWARE
| FIRING MODES | Semi & Ramping capped and uncapped |
|---|---|
| DEBOUNCE MODES | 10 Debounce Modes |
0 comments:
Post a Comment